References
Hereafter please find an excerpt of reference objects from different trade sectors. The list will continuously be updated. However, only part of our customers of each industrial sector can be mentioned here.
Own references
References solar panels
-
220 kWp PV-plant Petrovija (Croatia)
Coating of 188 solar modules of a pv plant build in 2014 in Petrovija.
1.464 m² were coated (880 poly crystalline modules).
Total power: ca. 220 kWp.
The plant became operative on April 8, 2014.
-
40,56 kWp PV-plant Težke Vode (Slovenia)
Coating of a pv plant build in december 2013 in Težke Vode.
275 m² were coated (169 poly cryistalline modules)
Total power: ca. 40,56 kWp.
The plant became operative on Dec. 20, 2013.
-
16 kWp PV-plant in Hasloch, Germany
Coating of 95 m² pv plant in Hasloch, Germany, with TA2210 in March 2013
95 m² were coated (83 poly crystalline modules)
Total power: ca. 15,81 kWp.
The plant became operative on April 25, 2012
-
4,8 MWp PV-plant in Bobitz, Germany
A solar park which was constructed and coated with TA2210 in 2011 in Bobitz, Germany.
The plant became operative on Dec. 28, 2011
Power: 4,8MWp
-
Private 30kWp PV-plant in Berverstedt, Germany
A pv plant whose panels are coated with TA2210 in Beverstedt, Germany (for a better demonstration of the efficacy of, 2 modules were left uncoated – see bottom-line, to the right). The photos were taken after a heavy rain shower. As can easily be seen, the coating keeps the surface clean and dry – contrary to the non-coated panels. Furthermore the coated modules dry up very fast due to the hydrophilic surfaces
The plant became operative on April 25, 2012
-
20 kWp PV-plant in Höhnhart, Austria
A 125 m² with TA2210 coated pv plant in October 2012 in Höhnhart, Austria
125 m² (i.e. 97 mono crystalline modules) were coated
Total power: ca. 19,8kWp.
The plant became operative on Feb. 25, 2012.
-
15 kWp PV-plant in Ennepetal, Germany
Design:
4 separate segments of a 16 modules (3,68 KwP)
2 segments of a 16 modules installed on Jul. 23rd, 2009
2 segments of a 16 modules installed on Oct. 20th,2009
1 segment (16 modules) were coated with TA2210 on Oct. 20th, 2009.In autumn 2009, in Ennepetal/Germany an existing PV plant which consists of segments with 16 single modules was coated with. As all four segments have separate wiring and connections, it was possible to separately record the energy yield of the four modules on a weekly basis.
The modules which were installed on Oct 20, 2009 came from Antaris Solar Co. As the modules' surfaces were slightly contaminated with silicone oil, they all had to be cleaned by means of an abrasive pre-cleaner (NR1304 Cleaner abrasiv) prior to coating. Then, the modules were manually coated with TA2210 by means of HVLP equipment. Material consumption: approx. 40 ml/m². Finally and prior to installation, the modules were dried in a heated assembly hall for 24 hours.
Data recording and transmission was done by the customer. As expected, in the summer period the energy yield was significantly higher than in the winter period. Due to snowfalls in winter 2009, periodically the yield was even lower.
- 1
References facade
-
House facade Popp & Kretschmer in Vienna (Austria)
The facade has been renovated, painted and then coated in the shop floor (ground floor on the left). The photos were recorded well six years after the coating. In the area of the uncoated surfaces (first floor upwards as well as ground floor on the far right), the beginning soiling is visible which is especially noticeable at the transition coated/uncoated (light/dark) (see detail).
-
House facade Multi-family houses Leverkusen
The façades of the multi-family houses of a residential settlement from the 60s and 70s were painted using traditional mineral paints and then coated with TA2207. One year later the facades still look like "freshly painted". The houses make a clean and inviting impression.
-
Renovation of a facade with algae attack in Asten (Austria)
The facades of the family house (right side) and the cultivation (left side) were heavily infested with algae. After cleaning with a high-pressure cleaner, the right facade was treated with a commercially available biocide, the left part primed with TP2221 and coated with TA2207. After nearly 2½ years, the superiority of the product is evident. While the right façade already suffers from algae, the façade coated with looks like "freshly painted". Nothing can be seen of algae, even though the floor is very clearly affected in front of the coated wall.
-
Office building glass facade in Langenfeld, Germany
Cleaning and coating of rainscrean cladding
-
City government in Langenfeld, Germany
Glass roof in front of the city hall
Test coating - self-cleaning
-
Company Lankhorst in Witten, Germany
Window frames at the head facade
- 1
References hygiene
-
Podological practice in Langenfeld, Germany
Hygienic coating of ceilings and walls in treatment rooms
-
Hotel Grand Tour in Wesseling, Germany
Hygienic coatings in lounges
-
Medical practice Dr. med. Elsas in Langenfeld, Germany
Hygienic coatings in waiting lounge, lobby and lavatories
Hygienic coating of the reception desk (contact area)
-
Underground car park in Norway
Anti-mouldiness coating of ceilings and walls of a parking level (800 qm)
-
Private motor yacht
Coating of glass, chrome and plastics surfaces
Coating of all plexiglass surfaces on top of the sun deck
- 1
© Copyright 2025 PHOTOKAT Oberflächentechnologie GmbH. All rights reserved.